2024 Fisher XRS™ 8 ft. 7 in.

Call for Price

Call for Price

Overview

Availability Brochure
Year2024
MakeFisher
ModelXRS™ 8 ft. 7 in.

Product Features

Description

Put your skid-steer to work with an XRS™ winged snowplow. Built to handle the extra demands of skid-steer operation with winged plow performance and simple operation for all experience levels. This plow also offers fast and easy hook up, adding versatility to your snow-clearing arsenal. Clear large parking lots, maneuver between cars and parking islands, and get the most out of your skid-steer this winter.

Highlights
  • Plow Blade Construction: Available in powder-coat steel, the XRS snow plow is available in 8’7" blade width. The 29 1/2" tall, 12-gauge moldboard features independent wing control and comes standard with a 6" steel cutting edge, increasing wear resistance, and the poly wing cutting edges feature trip protection. The blade is also pre punched for easy accessory installation.
  • Articulating Wings: The 8 ft.7" XRS articulating blade extends to 9 ft.8" with both wings pinned back.
  • Skid-Steer Compatible Mount: The FISHER® XRS™ snow plow is also available with skid-steer mounting options. Clear large parking lots with the ability to easily maneuver between cars and parking islands. The oscillating skid-steer mounting plate gives you six degrees of side-to-side travel that follows contours to improve scraping and cutting edge wear while reducing damage to parking lot surfaces. This design uses the skid-steer loader’s bucket hydraulics to lift and lower the blade for a more intuitive operator experience.
  • Structural Reinforcement: The next generation XRS snow plow features a heavy-duty torque tube and eight vertical ribs for substantial structural support. The tough construction of this channel provides rigidity and blade strength to eliminate buckling under extremely heavy forces.
Features Accesories
  • Shoe Kit: Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER® shoes are made of cast iron for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation.
  • 10" Rubber Deflector: Dress up your blade and improve functionality with a genuine FISHER® rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.
  • Quick Coupler Set: Quick couplers allow for an easy, tool-free connect and disconnect of plow hydraulic lines to standard flat-faced skid-steer hydraulic couplers. Set comes with male and female couplers.
  • 1/2" Steel Moldboard Cutting Edge Kit: The moldboard steel cutting edge kit. This does not include replacement cutting edges for the wings.
  • Commercial Blade Guide Kits: Commercial Blade Guides are made from durable and highly visible fluorescent orange material and feature FISHER® branded reflective tape. Available in 24" or 36" lengths, these blade guides provide improved visibility and enhance your ability see the position of your blade.
Specifications
  • Models: 8' 7" XRS
  • Moldboard Options: Powder-Coated Steel
  • Blade Type: Winged Blade
  • Vehicle Compatibility: Skid-Steers
  • Approx. Weight* (Without Mount): 1,125 lb
  • Plowing Width (Full Angle): 7' 10"
  • Blade Width: 8'7" Scoop; 9'8" Wings Pinned
  • Blade Height: 29 ½"
  • Blade Gauge: 12 ga
  • Trip Springs: 4
  • Ribs: 8
  • Angling Rams: 1 ½" x 10"
  • Cutting Edge: ½" x 6" Steel (Standard)
  • Mount Type: Oscillating Skid-Steer Mounting Plate
Key Features
  • Trip-Edge Protection: The expandable wing blade features independent trip-edge protection to get over bumps and hidden obstacles to protect the plow, the truck and the operator. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow. The plow wings feature polyurethane cutting edges designed specifically to provide added trip protection. The FISHER® trip-edge uses compression-type springs that never require adjustment and will not wear out like extension springs.
  • Reliable Hydraulics: We design and manufacture our own hydraulics to ensure the highest standards of performance, quality, and durability—giving you a plow that is fast, responsive, and built to last. This allows plow drivers to change the blade position quickly and easily for efficient plowing. All critical hydraulic components are fully enclosed for protection from the elements.
  • STORM GUARD™ Baked-On Powder Coat: The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows.
  • Pre-Punched Blades for Accessories: The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.
NOTES:
*Does not include vehicle mount

General

Blade Height 29 1/2 in.
Blade Width (Scoop): 8 ft. 7 in.; (Wings Pinned): 9 ft. 8 in.
Cutting Edge 1/2 in. x 6 in. Steel
Plowing Width (Full Angle): 7 ft. 10 in.
Weight 1125 lb.

Shopping Tools